Mid-Continent Instruments and Avionics
TA202 SERIES HIGH POWER USB CHARGING PORT/Type A, C, bottom connector
Part #:
6430202-2 Manufacturer part #:
6430202-2
Unit Quantity:
1.00
Min. Order Qty:
0.00
0.38
To order, contact us now
MAP:
0.00
1 877 524 8100
The TA202 series high power USB charging port converts 10 to 32 DC volts from the aircraft to a standard 5 volt power that can charge any electronic device that uses a USB connector â including cell phones, GPS devices, and tablets. The TA202 provides one or two USB-A or USB-C ports and can be mounted in a variety of locations throughout the aircraft. This unit is certified to FAA TSO C71 and qualified to multiple RTCA DO-160 requirements which provides confidence and allows installation in the cockpit or cabin.
This variant of the TA202 provides USB-A and USB-C connectors in the front and a power input located at the bottom of the unit.
- Provides 3.0 amps per charging port simultaneously
- 10 to 32 VDC input voltage
- 5 VDC ±0.25 output voltage per port
- Dual Type-A, Type-C USB connector
- Short-circuit, over-current, and over-temperature protection
- In-seat, cabin and cockpit mount
- Designed and built in Wichita, Kansas, USA
Weight:
1.3 oz (38 g)
1.3 oz (38 g)
Dimensions:
1.5 x 1.03 x 1.25 in
Input Voltage:
10 - 32 VDC
Input Power:
18 W per port, maximum
Output Voltage:
5 VDC ±0.25 per port
Output Current:
3.0 amps per port
USB Connector:
Type-A, Type-C
Power Input:
bottom
Mating Connector Kit:
MCI P/N 9017960 (included)
Mounting:
in-seat, cabin, cockpit; front or rear mount
optional front mount kit (MCI P/N 9017897; dual port only)
optional instrument mount kit (MCI P/N 9017947; dual port only)
Certifications:
FAA TSO C71 certified
RTCA DO-160G qualified